Titramax VT Chloride - ECH Scientific Limited

ECH Logo
ECH Logo
ECH Logo
Go to content
Titramax VT CHLORIDE
Determination of chlorides in water and extracts
Product description
The Titramax VT CHLORIDE can be used to determine the chloride concentration in water samples and water-soluble components from solids and organic mixtures. The method is suitable for contents from 0.001 % to 100 %. In foodstuffs the contents are very high, in natural waters or petroleum very low.

The titrator fulfils, among others, the requirements of the standards ASTM C 1218, D 4458-15, D 4929-22, D 6470-99; DIN EN 196-2; ISO 5810, 5943, 6227, 9197-1; UOP 456-80.

The measurement uses a volumetric titration method with silver nitrate solution (0.001 - 0.1 mol/L).

The sample is dosed into the reagent of water and nitric acid, then the precipitation titration with silver nitrate starts. The user has to enter the sample weight into the menu. The titration speed is precisely adjusted to the reaction rate by control algorithms.

The titration is performed automatically until the endpoint indication of measurement. At the end of the measurement, the result is displayed in mg/L, but can also be displayed in other units.
Titramax VT CHLORIDE
Applications
Typical applications are in the field of water and wastewater monitoring as well as food and drug control. But applications in organic materials, such as salts in petroleum or building materials, can also be determined precisely with the titrator. This requires additional extraction steps according to the respective standardised method.

The Titramax VT CHLORIDE is suitable for analysis of

  • drinking water, surface water, seawater
  • technical water such as boiler water, cooling water
  • extracts from foodstuffs, medicinal substances, plants and technical products
  • extracts from petroleum and petroleum products) - method available on request
  • chloride, bromide, iodide as simultaneous titration - method available on request
Advantages
  • Complete measuring station for the desired parameter (without extraction)
  • Fully-automatic volumetric titration
  • Precise adjustment of the titration parameters by control algorithms
  • Preset measurement method allows an immediate start
  • The result output can be adjusted to your needs by using a formula generator
Features
The Titramax VT CHLORIDE consists of

  • an automatic volumetric titrator with potentiometric silver indication,
  • a titration vessel with stirrer unit.

The analysis is based on

  • a precipitation titration in an aqueous medium,
  • a precise indication by a selective electrode, which is stable over long periods.

Steps of the analysis

  1. Calibration of the electrode
  2. Standardization of the titration solution
  3. Titration of water sample
Titration graph of a sample
Titramax VT CHLORIDE
Back to content